posted
Please ask me any questions you may have with West System Epoxy for the Sign Shop. .coating HDU .bonding hardware to HDU .pigmenting epoxy with One Shot .Repairing damaged Signs
posted
Haven't had the chance to try West systems Epoxy so have a few questions. Will it Lift/React with 1Shot if applied over UN-Hardened 1Shot. (we had a problem with a different Epoxy Cracking/Lifting the paint when applied over the top of it./ Think it was too hot)
If 1Shot is added to the Hardener does accelerate the cure Like it does in Polyurethane Resin
posted
Hey ted, I have a question for you? I have some 105 and 207 currently on hand, and was curious if I could use this for exterior signage and if so what preparations should I perform.
Also is this suitable for laminating materials together. Thanks, Dale
posted
Ted I have the same question as Dale, but since July I have not seen the answer to his question, "I have some 105 and 207 currently on hand, and was curious if I could use this for exterior signage and if so what preparations should I perform."
Love to have an answer.
Jay Pollard
-------------------- Jay Pollard Thingswood 105 Keystone Court Thunder Bay, Ontario P7C 2E6 (807)475-4888 thingswood@shaw.ca Posts: 1 | From: Thunder Bay, Ontario, Canada | Registered: Aug 2004
| IP: Logged |
Ted sent me an email off line, He said, although it is a little dear in price, it would do the job just fine, if you have any 403 around, fibre filler it will work well to thicken it up for laminating. As for tinting with paint, not so great, as the Hardner I have is a real amber coulour, it will not take a light paint tint such as white very well, I had to take it up to 20% which would not alllow it to harden, so I subsequently had to strip it all off, and start over the old way, by flat pinting it.
Printer-friendly view of this topic