posted
I have a Gerber LMK Link, board and com cable to run any Gerber console plotter(4B, Sprint, SuperSprint, etc.) from any Gerber sign software. New price was over $1000, first $500 takes it to it's new home..... works fine....
posted
Hello Mike. I'm looking for the interface cord that plugs into a font slot of the 4B and the other end plugs into the computer. Is that a R594 cable? Not sure just exactly what the LMK does for the 4B. Inform me please. Thanks Ray
-------------------- Ray Skaines League City, Tx www.srsigns.com Posts: 130 | From: League City, Texas | Registered: Mar 2003
| IP: Logged |
posted
Doesn't LMK stand for Link Module Kit? When I bought mine it came with the cable and two plug ins. The board is similar to the look of a font for a 4B but has 1/3 larger (plugs in back slot).It shows all the circuits (internal workings and is as thin as a 4B font). The lmk is the one that is thicker about a half an inch, and is covered, and plugs in where the front font board would usually plug in. You have to make sure you plug these in the correct places. I bought mine just before the price changed and for $275, then they went up immediately to $950 or more. One price jump and never went down. They are worth every penny, and it's lasted me for six years at least now.
-------------------- Deb Fowler
"It's kind of fun to do the impossible - Walt Disney (1901-1966) Posts: 5373 | From: Loves Park, Illinois | Registered: Aug 1999
| IP: Logged |
Printer-friendly view of this topic