posted
A while back I had posted a design I was working on for some magnetic signs. Here is the finished product, with some changes which made it look much nicer than the first variation. I made 2 pair of these, 24" x 8", for two cars, and one set of em, 48" x 16" for a work van. I hand-cut the shapes, which wasn't too bad. I was slightly worried about them tearing, because of the intricate area by the wing of the hawk, but there is three layers of vinyl over these magnetics, so it should hold up quite nicely.
------------------ Tyler Malinky
A Step Above Signs Cleveland, Ohio 440.479.8129 440.842.1894 fax
www.astepabovesigns.com tmalinky@astepabovesigns.com or exmayors@aol.com
Posts: 190 | From: Parma, Ohio USA | Registered: May 2001
| IP: Logged |
------------------ Steve Barba is the proud owner, president, & sole employee of Sturgis Sign Works. "B0LT" on the chat room thing. 209 Oak Drive Sturgis SD 57785 sbarba2616@dtgnet.com 605-720-7667
Posts: 768 | From: Sturgis South Dakota | Registered: Nov 1998
| IP: Logged |
------------------ surf or MoJo on mirc Cheryl J Nordby Signs by Cheryl Seattle WA.....! signsbycheryl@hotmail.com Hitch your wagon to a star. Ralph Waldo Emerson http://www.thisismycool.com/signs/
Printer-friendly view of this topic