posted
Those of you who do a lot of truck lettering will probably recognise this name, or something like it. (Talk about logo piracy!!!!) This is a name on the transom of a trucking customer's boat. Obviously, he is a nut about Peterbilt trucks so this was the name he requested. All 2 mil vinyl, airbrushed with automotive basecoat/clearcoat. Sorry the pic is so dark but the boat was inside and I couldn't get it outside to get a better pic.
------------------ Dave Grundy shop#340 AKA "applicator" on mIRC "stickin' sticky stuff to valuable vessels and vehicles!" in Granton, Ontario, Canada 1-519-225-2634 dave.grundy@odyssey.on.ca www.odyssey.on.ca/~dave.grundy "A PROUD $ supporter of the website"
[This message has been edited by Dave Grundy (edited July 30, 1999).]
posted
Rick...Nope the clear doesn't wrinkle the vinyl, but the basecoat will if applied too wet. I used to find that happened sometimes when I was using a touch-up gun to spray it. But since getting an airbrush I have no problem with wrinkling, it just doesn't put out enough volume to saturate the vinyl.
------------------ Dave Grundy shop#340 AKA "applicator" on mIRC "stickin' sticky stuff to valuable vessels and vehicles!" in Granton, Ontario, Canada 1-519-225-2634 dave.grundy@odyssey.on.ca www.odyssey.on.ca/~dave.grundy "A PROUD $ supporter of the website"