posted
Any suggestions where I can find this one? I tried Clark & they suggested Nelson Harkins but I'm still waiting for a catalog. Any help would be greatly appreciated. Havin' fun, Checkers
[ August 25, 2002, 11:56 PM: Message edited by: Steve Shortreed ]
-------------------- a.k.a. Brian Born www.CheckersCustom.com Harrisburg, Pa Work Smart, Play Hard Posts: 3775 | From: Harrisburg, Pa. U.S.A. | Registered: Nov 1998
| IP: Logged |
posted
Checkers, Johnson Plastics sells the basic parts that you need. I think the product is made by JSI sign systems in LA, but not sure.
Johnson sells the top and bottom bars in both silver and gold anodized aluminum in two or three vertical sizes. If memory is any good, they will custom make any horizonal length. Or they will sell you the entire assembly made to your dimensions. We always bought the top and bottom bars and fabricated our own system. You can make the strips any number of ways, one being to use clear frosted engraving stock, backletter with vinyl, and then spray the back with black. It looks like a million dollars.
Johnson also has flyers that they will give you in small quantities, or you can purchase in large quantities, to assist in selling the product.
Nelson-Harkins will sell you "bare" systems, but they really get pushy about trying to upsell to a finished system. They do make nice products, however. Vic G
-------------------- Victor Georgiou Danville, CA , USA Posts: 1746 | From: Danville, CA , USA | Registered: Dec 1998
| IP: Logged |
posted
Hiya Vic, Thanks for the quick reply. I'm trying to get off easy on this one. Although I do have the resources to make something similar, i'm trying to find an "off the shelf" system that I could just letter and install. Supposedly, this could lead to a much larger project, a 23 story building, in which I would not be able to manufacture in a timely manner. I also did a search on the net for JSI Sign systems and only came up with a supplier in Atlanta, Ga. Would you, by chance, have the number for the place in California?
Thanks, Checkers
-------------------- a.k.a. Brian Born www.CheckersCustom.com Harrisburg, Pa Work Smart, Play Hard Posts: 3775 | From: Harrisburg, Pa. U.S.A. | Registered: Nov 1998
| IP: Logged |
-------------------- Ken McTague, Concept Signs 57 Bridge St. (route 107) Salem MA 01970 1-978-745-5800 conceptsign@yahoo.com http://www.pinheadlounge.com/CaptainKen
---------------------------------
"A wise man once said that, or was it a wise guy?" Posts: 2425 | From: Salem, MA | Registered: Apr 1999
| IP: Logged |
Printer-friendly view of this topic