posted August 08, 2002 09:58 PM
I've mounted a few posters to fome-cor for a local printer with good results using 3M spray adhesive. But now I need to mount one onto a piece of sintra. Has anyone done this before? And what is the procedure? Thanks in advance....
-------------------- Mike"Spud"Kelly zipperhead design Westminster, MA Posts: 367 | From: Westminster, MA | Registered: Mar 2001
| IP: Logged |
I've used the super77 with success. Don't know "the process" just make sure I have a NEW tip on rattle can (love that they give you an extra) spray the sintra ... spray back of poster ... wait to tac ... one person holds poster up ... one rolls with a speedball braier(sp?)(rubber roller) so far so good
-------------------- Compulsive, Neurotic, Anti-social and Paranoid ... but basically Happy Posts: 2677 | From: Rochester, NY, USA | Registered: Nov 1998
| IP: Logged |
posted August 09, 2002 07:13 AM
Thanks, Mark......I was hopin' someone would say that, 'cept you mention two people. Ahh......... what are you doin' later today?
-------------------- Mike"Spud"Kelly zipperhead design Westminster, MA Posts: 367 | From: Westminster, MA | Registered: Mar 2001
| IP: Logged |
Printer-friendly view of this topic