posted
The KIP proved to be a nice addition, we do quite a bit of blueprint scanning and printing for local mining companies as well a contractors... plus its fun to have a 36" wide laser printer as well as a 36" scanner (even if it is b/w) ... Since this photo was taken the second color copier has been replaced by a xerox tektronix 7700 color laser printer .. a whopping 22 ppm in full color.
Vinyl Shop - Since this was taken the 24" roland has been replaced with a big Graphtec ... It's a Jewel Howard!!
T-shirt press, screen press and a Riso digital duplicator <--- 120 ppm, sorta a cross between a photocopier and a printing press.
Small engraving setup (sorry for lousy pic) ... I'm not really happy with it but it's getting the job done for now ... my next one will not have signlab driving it..
This is the garage I built on 2 summers ago ... 25 x 60 16' ceiling - big enough to do a boom truck or tractor ... with a winter like we have, oct-may , Garage was a necessity.. Shop truck ... did layout about 2 years ago for full graphic package ... not done yet .. sorta like new sign for building . .
posted
Mike, I look at the tidy arrangement of your shop and get completely bewildered. I see nothing that I relate to as a sign shop. This must be the shop of the future. I see no mixing bench, paint cans, easils,brushes, or signs in progress. I see no woodworking equipment or tools for bending metal. I don't see a display room or signs covering the walls. The only part of your display that I do understand is your dog!
-------------------- The SignShop Mendocino, California
Making the simple complicated is commonplace; making the complicated simple, awesomely simple, that's creativity. — Charles Mingus Posts: 6806 | From: Mendocino, CA. USA | Registered: Nov 1998
| IP: Logged |
![[Frown]](frown.gif)
Printer-friendly view of this topic