I spray mount a lot of designs on a cement floor using 3M Super 77. I lay Craft paper down first, but still, the overspray gets on the floor because of "mist drift".
Just wondering: Would Rapid Remover clean this type of adhesive residue off of a cement floor? If so, what would your cleaning recommendations be? Thanks.
Todd
-------------------- Todd Gill Outside The Lines Potterville, MI Posts: 7792 | From: Potterville, MI | Registered: Dec 2001
| IP: Logged |
posted
for any type of overspray whether glue or paint I use the clay stuff thats sold at a auto body supply house. My Valiant had paint overspray, pollen and all kinds of crap on it, and it did the trick!
-------------------- HotLines Joey Madden - pinstriping since 1952 'Perfection, its what I look for and what I live for'
posted
We used a lot of 77 for displays for the 4th and had a little overspray on one end of a table. Rapid remover worked well to remove it and it only took a very light spray of the remover to losed the adhesive.
-------------------- Kent Smith Smith Sign Studio P.O.Box 2385, Estes Park, CO 80517-2385 kent@smithsignstudio.com Posts: 1025 | From: Estes Park, CO | Registered: Nov 1998
| IP: Logged |
![[Smile]](smile.gif)
![[Confused]](confused.gif)
Printer-friendly view of this topic