posted
Spoke to Cadlink UK today and they told me it is being Beta tested in US / Canada and Uk at the moment and released in September as an add on module having just purchased an Edge and Omega software i thought as i was a Signlab fan what is this module going to do that Omega does not, anybody Beta testing this add on! please tell me more
Adrian
-------------------- Adrian Howard Signrite Signs & Graphics Shaftesbury, Dorset United Kingdom ady@signrite.co.uk "Our only Business is Promoting Yours" Posts: 42 | From: UK | Registered: Dec 1998
| IP: Logged |
posted
Cadlink wouldn't even respond to my email about the new module. Heck, I would love to be a beta tester, anything is better than Graphix Advantage. As far as beta testers now, I would bet Glenn is.
-------------------- Wright Signs Wyandotte, Michigan Posts: 2786 | From: Wyandotte, MI USA | Registered: Jan 1999
| IP: Logged |
posted
David I was really shy about changing to Omega from GA...there is a "little" learning curve. But having had it awhile now and having been beta testing 1.56, I would recomend the upgrade, I not only did that, I just bought an Edge too.
Its very smooth and trouble free....I guess its what you get used too. I have Signlab E6 too but do most on my Omega, I have heard about the Edge module but no more as yet.
posted
When I upgraded from Graphic Advantage to Omega the price was $595 - probably still somewhere around there. I bought it actually before it had been released and then kept it over a year before installing it because of the bad reports it was getting on crashing and some other problems.
I looking forward to the latest revision to see how much better it works.
I know some folks that are doing some testing for Cadlink, but if I told you I would have to kill you.
[ July 08, 2002, 07:00 PM: Message edited by: Raymond Chapman ]
-------------------- Chapman Sign Studio Temple, Texas chapmanstudio@sbcglobal.net Posts: 6306 | From: Temple, Texas, USA | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic