posted
Hi Guys I'm having a problem with setting my plotter to cut a long run (70")without tiling-roland cx24 first time cutting that lenght! I design the layout(13"x68") in signlab ES2 lite,an when I go to plot it shows tiles 1 X 3 plotter setup paper size is 984.000x23.000 any help would be greatly appreciated thank you
[ July 05, 2002, 03:24 PM: Message edited by: Don Southard ]
-------------------- Don Southard DS Signs and Design Omaha,NE 68142 Posts: 24 | From: Omaha,NE | Registered: Nov 2001
| IP: Logged |
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
Don...The CX will cut a LOT longer than 70". You didn't say what cutting software you are using but in the window where you set the vinyl width and length just set it to whatewver length you want. I use a CM 24 (the predecessor to your machine) and regularly cut 10-15' long solid stripes for highway trucks and trailers. The "default length" is 62.99" but you can go lots longer.
Just looked in my user manual...max length is 984.125" (24,998 mm)
[ July 05, 2002, 03:25 PM: Message edited by: Dave Grundy ]
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
Printer-friendly view of this topic