posted
Hey Wayne- I thought you were tawkin' wike Ewmer Fudd! I didn't wealize you were wondewing about wapid tack...Just stwokin'...ask Wogew. wuv-JILL
-------------------- That is like a Mr. Potato Head with all the pieces in the wrong place. -Russ McMullin Posts: 8834 | From: Butler, PA, USA | Registered: Jan 2001
| IP: Logged |
posted
Roger, I'm applying a three color graphic to a window. The black cast went on fine...bonded immediately.
The cast metalic gold, however, hasn't bonded yet. it's been on for about 15 or 20 min. and I still can't remove the app tape. I used the el Rapido dos.
-------------------- Wayne Webb Webb Signworks Chipley, FL 850.638.9329 wayne@webbsignworks.com Posts: 7405 | From: Chipley,Florida,United States | Registered: Oct 1999
| IP: Logged |
posted
Some folks have had similar problem, cause they didn't think it was necc. to "clean first layer before applying second layer", this is a very important issue.
Everytime you plan to apply, plan to go thru Rapid Tacs' cleaning instructions again !
Thats just the way it is, I onwy make da stuff, wat cud I du ??
Roger
-------------------- Roger Bailey Rapid Tac Incorporated 186 Combs Dr. Merlin Oregon 97532 Posts: 3020 | From: Merlin Oregon | Registered: Dec 1998
| IP: Logged |
posted
Thanks Victor, That mailbox thing is still a mystery. I'll get my ISP techies to check it again. I'll send you one and you can just cut and paste your message and then reply. That should work
-------------------- Wayne Webb Webb Signworks Chipley, FL 850.638.9329 wayne@webbsignworks.com Posts: 7405 | From: Chipley,Florida,United States | Registered: Oct 1999
| IP: Logged |
posted
Wayne..I LOVE Rapid Roger's products but I learned a LONG time ago that there are two situations to NEVER use his Rapid Tac or Rapid TacII. Those are..on windows and over rivits. Both have resulted in disaster for me on several occasions.
For all other applications, I wholeheartedly recommend them.
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
posted
Don't hate me Roger......but I am going to have to agree with Dave. I do banners and windows dry. I love your Rapid Remover so much tho! I have told many people about it. It is great stuff!!
Posts: 3729 | From: Seattle | Registered: Sep 1999
| IP: Logged |
#1- never never use window cleaners around Rapid Tac or any wet vinyl application ! Also; never use "prep solvents" from the paint industry (get rid a that PREKLENO Dave)and no 409, glass plus,vinigar,amonia,simple pimple,etc.
#2- Dave and Cheryl, if you can't do a wet application on glass with Rapid Tac products, well your not doin somethin right. If I can do it on "FROZEN" glass, then you can do it on glass
After you laid the black, did you clean the area "again" before applying 2nd peice (overlay or not) still important.
The "fresh" cleaning with R.T. is not an option for good measure, its the rules.
If you clean(with R.T) and apply some vinyl, then you wait 5 minutes and apply a shadow,etc., you must clean again !! It sort of "sets up the substrate" for the next application.
I talk to a large number of people monthly thru e-mails,phone calls,etc., they praise the products for the ease of application, yes on glass too, wheellly !!!!!
Woger
-------------------- Roger Bailey Rapid Tac Incorporated 186 Combs Dr. Merlin Oregon 97532 Posts: 3020 | From: Merlin Oregon | Registered: Dec 1998
| IP: Logged |
#1- never never use window cleaners around Rapid Tac or any wet vinyl application ! Also; never use "prep solvents" from the paint industry (get rid a that PREKLENO Dave)and no 409, glass plus,vinigar,amonia,simple pimple,etc.
#2- Dave and Cheryl, if you can't do a wet application on glass with Rapid Tac products, well your not doin somethin right. If I can do it on "FROZEN" glass, then you can do it on glass
After you laid the black, did you clean the area "again" before applying 2nd peice (overlay or not) still important.
The "fresh" cleaning with R.T. is not an option for good measure, its the rules.
If you clean(with R.T) and apply some vinyl, then you wait 5 minutes and apply a shadow,etc., you must clean again !! It sort of "sets up the substrate" for the next application.
I talk to a large number of people monthly thru e-mails,phone calls,etc., they praise the products for the ease of application, yes on glass too, wheellly !!!!!
Woger
-------------------- Roger Bailey Rapid Tac Incorporated 186 Combs Dr. Merlin Oregon 97532 Posts: 3020 | From: Merlin Oregon | Registered: Dec 1998
| IP: Logged |
![[Smile]](smile.gif)
![[Wink]](wink.gif)
![[Confused]](confused.gif)
![[Eek!]](eek.gif)
![[Razz]](tongue.gif)
![[Roll Eyes]](rolleyes.gif)
![[Mad]](mad.gif)
![[Cool]](cool.gif)
Printer-friendly view of this topic