posted
First of all, thank you everyone for your responses to my last Flexi post. Question... Can I create a custom vinyl color palette? If so, can I save it (in a folder) and pull it up on another design station, using Flexi, on our network? Thanks!
-------------------- Dan Donnelly Atlanta, GA Posts: 139 | From: Atlanta | Registered: Jan 1999
| IP: Logged |
posted
I realize that Atlanta isn't a small town, but there is a supplier in Atlanta that gives excellent Flexi training and could show you how to do all these things. JSI
If I were near someone that could show me the stuff instead of needing to read manuals and watch videos, I'd be there with my questions.
-------------------- The SignShop Mendocino, California
Making the simple complicated is commonplace; making the complicated simple, awesomely simple, that's creativity. — Charles Mingus Posts: 6807 | From: Mendocino, CA. USA | Registered: Nov 1998
| IP: Logged |
posted
Danny Right click on the color bar. I think that will answer your question. Almost anything on the Flexi bars you can right click on a get the answers your looking for. Richard
-------------------- Richard Girard Girard Signs & Graphics Oakland Park, Florida richard@girard.com 954-772-0059 Posts: 148 | From: Oakland Park, Florida U.S.A. | Registered: Nov 1998
| IP: Logged |
posted
Thanks, guys. I put a call into JSI for training. I created a custom pallete by opening the Fill/Stroke Editor, and clicking "Advanced". The "Color Specs" box comes up and you can customize there. Then save the new custom palette as a .swt file on the network. Now all of my designers can access that pallette.
Pretty cool.
D
-------------------- Dan Donnelly Atlanta, GA Posts: 139 | From: Atlanta | Registered: Jan 1999
| IP: Logged |
posted
Can anyone tell me how to save "patterns"(that I create) in the latest Flexi. I'm Ok with "fills", but can't seem to get the patterns to save.I can create & save them in the older version(5), but loose them in "6" Any help would be apprteciated.
posted
J. I noticed that too, that I cant save fills. I think its only availabe to save with the pro version
-------------------- Ken McTague, Concept Signs 57 Bridge St. (route 107) Salem MA 01970 1-978-745-5800 conceptsign@yahoo.com http://www.pinheadlounge.com/CaptainKen
---------------------------------
"A wise man once said that, or was it a wise guy?" Posts: 2425 | From: Salem, MA | Registered: Apr 1999
| IP: Logged |
Printer-friendly view of this topic