posted
What do you use to clean bare mill-finish aluminum(on a horse trailer)to remove the adhesive left behind from vinyl? I already tried Unglue(citrus based) and GlueOff.
What do you use to remove or polish out the ghost where the vinyl was on bare aluminum? Thanks
-------------------- Wayne Webb Webb Signworks Chipley, FL 850.638.9329 wayne@webbsignworks.com Posts: 7405 | From: Chipley,Florida,United States | Registered: Oct 1999
| IP: Logged |
posted
Acid wash at a truck stop or a mobile wash service, after using Rapid Remover. That works for me.
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
posted
BTW, if you would like FREE samples of all 5 Rapid products, just e-mail your street address to; mail@rapidtac.com visit the site; www.rapidtac.com
Roger
-------------------- Roger Bailey Rapid Tac Incorporated 186 Combs Dr. Merlin Oregon 97532 Posts: 3020 | From: Merlin Oregon | Registered: Dec 1998
| IP: Logged |
Making the simple complicated is commonplace; making the complicated simple, awesomely simple, that's creativity. — Charles Mingus Posts: 6806 | From: Mendocino, CA. USA | Registered: Nov 1998
| IP: Logged |
posted
The client said he had been using an acid wash of some type on it and there were ghosts from two previous "stickerjobs" still shinin'on it. Possibly because the vinyl adhesive residue hadn't been removed by the previous vinyl installer. I don't know.
Rick,do you remember what brand/type of polish that was?
Thanks everyone!
-------------------- Wayne Webb Webb Signworks Chipley, FL 850.638.9329 wayne@webbsignworks.com Posts: 7405 | From: Chipley,Florida,United States | Registered: Oct 1999
| IP: Logged |
![[Wink]](wink.gif)
![[Smile]](smile.gif)
Printer-friendly view of this topic