posted
My norm is the 45 degree chamfer with a 1/4" bite and the 1/2" bead. I hardly ever use anything else on SignFoam. Once in awhile, I will use the ogee. Whatever you use, it should have the bearing guide.
-------------------- John Smith Kings Bay Signs (Retired) Kissimmee, Florida Posts: 822 | From: Central Florida - The Sunshine State | Registered: Jan 2000
| IP: Logged |
posted
You can use almost any bit that you would use on wood, foam is a very easy material to rout as it is relativley soft compared to timber and there is no grain to deal with. cheers TErry
[ June 12, 2002, 04:41 PM: Message edited by: Terry Colley ]
-------------------- Terry Colley The VintageSign Co 42 barrack hill Romiley Stockport Cheshire, England sk6 3az tel 0161 494 5089 terry@bullandbrush.fsnet.co.uk Posts: 210 | From: England | Registered: Dec 1999
| IP: Logged |
Printer-friendly view of this topic