posted
My plotter won't plot! Every time I go to "cut plot" my flexisign crashes with the error code:
The application "Flexisign" has unexectedly quit, because an error of type 3 occurred.
You should save your work in other open applications and restart the computer.
I've been involved with Macs for years now but I cannot get this to work. The job is due in 1 day. Help!
-------------------- Mark Bachman Bachman Studio Great Barrington, MA USA http://www.signart.pair.com Posts: 83 | From: Great Barrington, MA, USA | Registered: May 1999
| IP: Logged |
posted
Mark, if I were you, I would re-install the software and see if that corrects it. I use an older version of flexicut on my G3, and if I try and import an ai file higher than 3.0, mine does what yours is doing. Never had it to shut down like that when going to plot though. Maybe try and change the drivers on it also, but if it's been working all along, probably aint that.
-------------------- Maker of fine signs and other creative stuff. Located at 109 N. Cumberland ave. Harlan, Ky. 40831 606-837-0242 Posts: 4172 | From: Ages-Brookside, Ky. Up the Holler... | Registered: Jul 1999
| IP: Logged |
Printer-friendly view of this topic