posted
i hope this starts are real good thread. CUTTING THICK VINYL (For CorelDraw versions 5 to 9) With reflective, phosphorescent or any other vinyl that is too thick for your plotter to cut, you can duplicate your lettering on exactly the same position by pressing the "Plus" (+) key. By doing this your plotter will run the blade over the lettering twice. This principal will also work in other sign-cutting applications.
REMOVING OVERLAPS FROM SCRIPT LETTERING (For CorelDraw versions 7.467 & 8) Enter a line of script text. Go to "Arrange" menu and click on "Weld", a dialog box will appear. Click on the "Weld To" button and then point the arrow to your line of text and click.
-------------------- Leaper of Tall buildings.. If you find my posts divisive or otherwise snarky please ignore them. If you do not know how then PM me about it and I will demonstrate. Posts: 5274 | From: Im a nowhere man | Registered: Jul 2001
| IP: Logged |
-------------------- Leaper of Tall buildings.. If you find my posts divisive or otherwise snarky please ignore them. If you do not know how then PM me about it and I will demonstrate. Posts: 5274 | From: Im a nowhere man | Registered: Jul 2001
| IP: Logged |
posted
curt...the original ver 7 of corel the weld feature was screwed up, didnt work. the 7.467 revision fixed it..thats why the tip was there. corel 3,4,5,6, 8,9,10 all worked right from the get go.
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
Curtis, The people at Smart Artz sell some of our products and have also have some of our tips and downloads. You can also find the same tips at http://www.signwizard.co.uk/... SignWiard UK are also resellers of our products. I wrote the tips around the time CorelDRAW 9 was released.
If anyone has a good Corel tip I would love to hear from them.
-------------------- Andrew Gourvelos A Signs Sydney, NSW, Australia Posts: 104 | From: Sydnet, NSW Australia | Registered: Mar 2000
| IP: Logged |
Printer-friendly view of this topic