posted
years ago i bought some material that you could cut on a plotter and apply to nylon. i think the guys name was terry but i am not sure & i can't remember the name of his company and i have to letter a tent by friday. if anyone can tell me where to buy this material i would greatly appreciate it. thanks
-------------------- Jimmy Chatham Chatham Signs 468 stark st Commerce, Ga 30529 Posts: 1766 | From: Commerce, GA, USA | Registered: Nov 1998
| IP: Logged |
posted
The heat transfer stuff is Stahls' Cad-Cut . I know they have a website but I don't have it at hand. They are at 1-800-521-9702.
-------------------- John Smith Kings Bay Signs (Retired) Kissimmee, Florida Posts: 817 | From: Central Florida - The Sunshine State | Registered: Jan 2000
| IP: Logged |
-------------------- a.k.a. Brian Born www.CheckersCustom.com Harrisburg, Pa Work Smart, Play Hard Posts: 3775 | From: Harrisburg, Pa. U.S.A. | Registered: Nov 1998
| IP: Logged |
posted
the stuff i am hunting is not heat transfer. it has an adhesevive back and applies like vinyl except it is nylon. the size of the logo is 3'x4' and i can't get a heat transfer machine on the top of the tent.
-------------------- Jimmy Chatham Chatham Signs 468 stark st Commerce, Ga 30529 Posts: 1766 | From: Commerce, GA, USA | Registered: Nov 1998
| IP: Logged |
posted
Yeah, Jimmy, I got a sample of the nylon stuff too several years ago but haven't seen it since.
-------------------- John Smith Kings Bay Signs (Retired) Kissimmee, Florida Posts: 817 | From: Central Florida - The Sunshine State | Registered: Jan 2000
| IP: Logged |
posted
Over the years it has gone by different names...Dac-Ez from Advertising Ideas 800-323-6359. Fabricbrite from Creative Banner in Minnesota 800-528-8846. Be sure to mention to both that you saw it here on the Letterville website, and urge them to be a merchant! My best luck is to also heat set it from the back side once applied by using a hand iron on a moderate temp, have a helper on the graphics side hold something flat against the surface so you can press against it with the iron. There is a knack to not overheating it...keep moving the iron around. Call if you need anthing else. Mick Samsel
-------------------- Mick Samsel Creative Services Cherokee, IA Posts: 499 | From: Cherokee, Ia USA | Registered: Jan 1999
| IP: Logged |
posted
It's called DacEz from Advertisin Ideas 800-323-6359 . Also FabricBrite from Creative Banners in MN 800-528-8846. Tell them you heard about it on this BB and maybe they should advertise here.
I always heat set them with a hand iron on a moderate setting. I have a helper hold some alumalite against the graphics. I then press and keep the iron moving throughout the graphics on the back side of the nylon. You can over heat the graphics/nylon...theres a minor learning curve as with anything. An awning I did 3 years ago with a southern exposure still looks / adhers great. This also was the only stuff I could get to stick / stay on a 100% polyester pop up tent that really got a lot of abuse. Call if any questions. Mick Samsel
-------------------- Mick Samsel Creative Services Cherokee, IA Posts: 499 | From: Cherokee, Ia USA | Registered: Jan 1999
| IP: Logged |
posted
thanks Mick advertising ideas was the 1 i was trying to remember.
-------------------- Jimmy Chatham Chatham Signs 468 stark st Commerce, Ga 30529 Posts: 1766 | From: Commerce, GA, USA | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic