posted April 18, 2002 01:44 PM
HI again. I was wondering if its as good as Nazdar 5900 or 6100. I'm planning on using it for d boards & acrylic. Thanks!
-------------------- Felix Marcano PuertoRicoSigns.Com Luquillo, PR
Work hard, party like a tourist! Posts: 2274 | From: Luquillo, Puerto Rico, USA | Registered: Nov 2000
| IP: Logged |
posted April 18, 2002 03:40 PM
I have been using Sericol Screen Inks on banners and tents now for more than 8 years. I use Polyplast LN Series thinned down with General Purpose Lacquor Thinners and either paint it directly on with soft truck brushes or spray it thru a gun or airbrush.
I double coat every color as the first coat is dull due to the reaction with the vinyl surface. Second coat comes up hard and glossy ... far superior wearing to any "Banner" paints I have used.
Good stuff!
PS: I've found any drips or errors can be cleaned off immediately with Vinyl Prep Wash solution without damaging the surface gloss of the banner
Printer-friendly view of this topic