posted
Need help, wondering if in Corel Draw can make Prizmatic font or do I have to do it on my own?? Trying to look for short cuts... I hate have to buy the fonts, cause the price is out range..
-------------------- Jaime Doyle Doyle Sign & Web Design RR1 Box 351-C Grampian, PA Posts: 79 | From: Grampian, PA | Registered: Oct 2001
| IP: Logged |
posted
Jaime... As Amy says, you can't just hit a key or click a mouse to create bevelled or prismatic VECTOR lettering in Corel. There is a step by step on the procedure at the following URL.
That being said, if you want to create prismatic "BITMAP" lettering there are plug-ins that will do this for you with a few clicks of the mouse. I don't use these myself because I don't do any digital printing. I am sure that others can steer you to those plug-ins.
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
posted
Jaime. I upgraded to ver 10 for one reason only. The contour tool in ver 9 was faulty. It would leave flat spots in the contour. Version 10 fixed that problem. Other than that the major advances were in areas that I don't use, like web design and stuff like that. For vector purposes, that was the only major advance that there was.
Oh yes, I almost forgot...In version 10 you can now apply a contour, a weld or an envelope to a "group" of objects instead of having to "combine" them or apply the function to each individual object.
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
posted
Boy Jaime, you just hit on a major after market plug-in that could make somebody a LOT of money. The utilities to do it with bitmaps abound, but not one to alter vectors.
As far as Corel, every version I've gotten of that program has been a significant improvement of it's predecessor. Not always in added tools, but in the speed, stability and integrating more of the bitmap and vector utilities together. I suspect it's only a matter of time before Corel Trace can read a 'beveled' bitmap in a predictable way and convert it reliably to smooth vector paths. 10's probably better than 9, but I doubt if it's quite there yet.
SONGPAINTER Original Sign Music by Sign People NOW AVAILABLE on CD and the proceeds go to Letterville's favorite charity! Click Here for Sound Clips! Posts: 1974 | From: Orleans, MA, Cape Cod, USA | Registered: Nov 1998
| IP: Logged |
posted
Jamie, At a cost of $20 or $25 a font, it will be well to your advantage to simply purchase some prismatic fonts. How long will it take you to do an entire alphabet in prismatic form? Hours. How much do you make an hour making signs? Instead of creating something that already exists, call one of the great signmaker-friendly font sites, give em a credit card number, and you will have your font in 10 minutes. Add the 25$ extra to the first sign you use it on, and then it is paid for.
Building a chisel or bevel letter in vector is not an overly difficult thing to do. It is, however, time consuming. A certain ability level in the program of your choice, along with an extreme amount of patience, is a must. Even when you have the entire "font" done, the time it takes to cut and paste, along with kerning the rascals, is excessive.
The chisel fonts that are commercially available are worth every penny that you spend. The time you will save will make it worth the purchase alone. I guess this assuming that you place some sort of value on your time.
Whenever I have wanted to buy a font for a specific job, I just added a little bit to the job to warrant it's purchase. Besides, then you will have the font forever to use again and again.
Dan Antonelli's fonts, available from Dave Simpson at Sign DNA, are exceptional quality and value for the money. Gene from the Fontry makes an exceptional valued set of chisel fonts as well. There is a set of chisel fonts that are available from Mr. Clipart although I can not attest to their quality as I have never seen them up close and personal.
Having made my own chisel letter and such, it has made me appreciate the ease that having the fonts already made affords me. I like 'em!
Have a great one!
-------------------- Bruce Bowers
DrCAS Custom Lettering and Design Saint Cloud, Minnesota
"Things work out best for the people who make the best of the way things work out." - Art Linkletter Posts: 6469 | From: Saint Cloud, Minnesota | Registered: Jun 1999
| IP: Logged |
posted
I agree that purchasing a prismatic font for a specific job and then adding that purchase to the price of the job is not a hardship.
Personally, I like to do the prisming (is that a word? ) on a job to job basis. I just do it to the letters that I need to do it to, not the whole alphabet and DEFINITELY not with an eye towards creating a font. As Bruce said THAT is a REAL pain in the butt! (And that's why the prismatic fonts are SOLD, not DONATED.
I have a couple of the prism fonts that came with my registering as a resident here (STEP RIGHT UP MR. MAYOR!!! ) and have used them on jobs, but I find that the selection is restrictive.
Nothing nicer than "all caps, Brush Script, done on an arc, with a nice prism effect in blue and red" to set your heart a'flutter!!!!!!!!!! (correct Ken Henry???????? inside joke)
Seriously...if all you have to do is a few letters, it doesn't take all that long and they don't have to be scientifically precise...painted letters that are prismed are not "precise". That is the beauty of it...each letter is "hand rendered".
(disclaimer---- The previous comment was not intended to start a war )
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
posted
ITs well worth the investment for the Prismatic fonts put out by Dan, Letterheadfonts,and The Fontry. All of them are good, and highly usable. The price for these fonts are exceedingly low for what it takes to create them and turn them into a font. IF I want to add a prism to a word for a sign, I do just that. Only that word. Its not that hard once you do it, that is one word at a time. There are a couple tutorials on here that describes the process of doing this and you should check these out. IT's really pretty simple once you do it a few times, but as pointed out, time consuming.
-------------------- Maker of fine signs and other creative stuff. Located at 109 N. Cumberland ave. Harlan, Ky. 40831 606-837-0242 Posts: 4172 | From: Ages-Brookside, Ky. Up the Holler... | Registered: Jul 1999
| IP: Logged |
posted
I seem to recall having a similar discussion around this same time last year. The end result of which was that I drove myself crazy learning how to design a prismatic font in corel 9. I posted the uppercase font in this posting http://www.letterhead.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=011687 (gotta love that search engine).
I never did get around to finishing the lowercase, I got too bu$y. --next slow down ..... I promise .... but I don't seem to recall seeing Mr. Grundy's contribution either ...
-------------------- Mike O'Neill
It has yet to be proven that intelligence has any survival value. - Arthur C. Clarke
posted
Just wanted to thanks you guys for helping me out here... Gave me a lot of advice... And Thanks for the Letterhead.com for having this site, cause it really helps me out... ;o) I don't know where I would be at without this site...
-------------------- Jaime Doyle Doyle Sign & Web Design RR1 Box 351-C Grampian, PA Posts: 79 | From: Grampian, PA | Registered: Oct 2001
| IP: Logged |
posted
Hey Jaime, before we retire this thread, I did a test that I had never tried before to check my theory that CorelTrace might produce a useful vector path on a chiseled bitmap. It was surprisingly easier and sharper that I imagined. Take a look at this -
Depending on the resolutions of the bitmap and trace settings, this could lead to a useable cut path. Getting a third color in the trace wouldn't have been a problem either, but I wanted to see how well it would handle just two colors like other prismatic fonts I've seen. This really isn't too bad. Maybe it's a viable approach. I'll be experimenting further next call I have for this effect. Good luck.
SONGPAINTER Original Sign Music by Sign People NOW AVAILABLE on CD and the proceeds go to Letterville's favorite charity! Click Here for Sound Clips! Posts: 1974 | From: Orleans, MA, Cape Cod, USA | Registered: Nov 1998
| IP: Logged |
posted
Thanks Joe... Now, I knew there has be a way in Corel Draw... Lucky I haven't start on them earlier... Or I would have wasted my time... thanks so much... )
-------------------- Jaime Doyle Doyle Sign & Web Design RR1 Box 351-C Grampian, PA Posts: 79 | From: Grampian, PA | Registered: Oct 2001
| IP: Logged |
![[Smile]](smile.gif)
![[Razz]](tongue.gif)
(correct Ken Henry???????? 
![[Wink]](wink.gif)
...
![[Embarrassed]](redface.gif)
)
Printer-friendly view of this topic