posted
This seems to be happening and I'm wondering why. The image gets these unprinted areas on this area of the film... about 4" in from the side. Does anyone recognize this problem? Thanks for your help.
-------------------- Jeff Vrstal Main Street Signs 157 E. Main Street Evansville, WI 53536 1-608-882-0322 Posts: 670 | From: Evansville, Wisconsin | Registered: Sep 2001
| IP: Logged |
posted
Jeff, The same thing happened to me the first time I used the PC60 on big prints. I sent a picture to Roland, they said it was a speck of dust under the vinyl.That cleared it up. John
-------------------- John Arnott El Cajon CA 619 596-9989 signgraphics1@aol.com http://www.signgraphics1.com Posts: 1443 | From: El Cajon CA usa | Registered: Dec 1998
| IP: Logged |
posted
If the unprinted area is always in the same spot, the problem is the strip under the substrate. It has to be free moving side to side. The same thing happened to me when I had the PC-60. The cleaner felt had somehow gotten down into the recess and prevented the movement of the strip. Give it a shot
-------------------- Mario G. Lafreniere (Fergie) J&N Signs Winter did show up! Posts: 1257 | From: Chapleau, Ontario | Registered: Jun 1999
| IP: Logged |
posted
Yes, it seems to occur in the same spot. If you look at the picture, the emblem on the right shows the problem. The one on the top right is exactly the same. The emblems on the left... in line with the previous on the right do not have the problem. I'll give things a good cleaning, call roland and give it a try. Thank you all for your help!
-------------------- Jeff Vrstal Main Street Signs 157 E. Main Street Evansville, WI 53536 1-608-882-0322 Posts: 670 | From: Evansville, Wisconsin | Registered: Sep 2001
| IP: Logged |
Printer-friendly view of this topic