posted
Would some one please give me a price on a 100 of these beuties. These look like they were printed on white coroplast but the color is the same as the stock yellow coroplast, so whatever is more efficient. Black and white on yellow, I will apply the little full color decal from my Durachrome.
-------------------- Brian Stoddard Northwest Signs
I see that the black ovals run off the edge of the panel. Normally, to do this the panels are a bit wider prior to printing, and then trimmed down to the required size. Doing this would increase the costs of materials since you would not be able to get as many pieces out of a 4'x8'.
To help keep the costs as low as possible, can the image be printed with a 1/2" margin or does it have to run off the edge as pictured?
Printer-friendly view of this topic