posted
New system, new OS (XP), new drivers (Roland site) It cuts, but it does it twice, once real slow, then reverses and runs normally. I'm cutting directly from Corel 9 as I have for a couple of years now. Any ideas, or do you know someone who has made this switch? Thanks.
Keep cool, do not freeze. Hellmans Mayonaise
[ January 30, 2002: Message edited by: Ed Harris ]
-------------------- Ed Harris Designs&Signs Lexington, TN
"Give me chastity and give me continence, but do not give it yet." -- Saint Augustine" Posts: 213 | From: Lexington, TN USA | Registered: Feb 1999
| IP: Logged |
posted
I'd love to take credit for thinking of this, but I just happened to send something without a fill and it worked perfectly. So, apparently it was trying to cut the fill, then the outline, when all you want is the outline. That having been said, I always used to cut with a fill and never had this problem, so I figure there must be a setting in there somewhere that will totally disable the fill (I'm looking at it now, and 'Polygon Fill' is set to off already) . If any of you come up with something, please let me know.
Also, while I have your ear, do you have any idea why the software sets the max width at 23.03", when it will cut 24"? Believe it or not, that extra inch is mighty useful (or at least that's what SHE said).
-------------------- Ed Harris Designs&Signs Lexington, TN
"Give me chastity and give me continence, but do not give it yet." -- Saint Augustine" Posts: 213 | From: Lexington, TN USA | Registered: Feb 1999
| IP: Logged |
posted
it wont cut 24"....unless you get some wider vinyl. where the pinch rollers are set at determines the width....you will lose a 1/2 of each end that it wont cut.
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic