posted
A belated Happy New Year to all! I am desperately seeking assorted mounting hardwares for signs ranging from 18"x24" up to 4'x8' in size. All of the suppliers I use have come up empty. I have been using a local metal works fabricator and am pleased with the results, but custom work is expensive and I really need a more cost effective solution.
I currently am in need of 2 metal straps that would attach to the top of a double sided 2'x8' Alumalite sign and form a "U" around a pin that is already attached to a custom scroll bracket.
S hooks won't work but the same basic pricipals apply.
Thanks in advance!
-------------------- Elwood Kinder Kinder Signs & Design Co. 401 S. Main St. Sikeston, MO. 63801
Posts: 31 | From: Sikeston, MO | Registered: Dec 2001
| IP: Logged |
posted
A few years ago, I got a small roll of 3/4" wide stainless steel strapping used for pipes. I think I got it from either Grainger or McMaster Carr. It may come in 1" wide as well, dunno, but, would be worth the look. I cut about a 6" strip, fold it in half and drill a 1/4" hole in the ends to accept a stainless bolt thru the MDO. A 4'x8' would need at the minimum of 4 hangers.
-------------------- John Smith Kings Bay Signs (Retired) Kissimmee, Florida Posts: 822 | From: Central Florida - The Sunshine State | Registered: Jan 2000
| IP: Logged |
-------------------- Elwood Kinder Kinder Signs & Design Co. 401 S. Main St. Sikeston, MO. 63801 Posts: 31 | From: Sikeston, MO | Registered: Dec 2001
| IP: Logged |