posted
I'm looking for a source of a nice looking wall mounted frame to put banners in. They would need to be made to fit my banner size and be able to easily change the banner. Cost is an issue also as always. I found one supplier at a ballpark cost of $150 to $200 each. These have a spring loaded frame that snaps shut on the banners edge.
Any ideas?? Thanks
-------------------- Ace Graphics & Printing Camdenton, MO. USA
posted
funny you should ask...just saw a neat(but not cheap) banner install. this guy put up a banner must be 24" x 30 feet. what he did was made alum brackets(1" x 1/4" solid strap)(4 of these) and bent and drilled to fit tightly on a 12"x 12" post. then on these he attached eyebolts. then he ran 1/4 steel cable top and bottom, attached banner to cables with S-hooks, and one one end he used those cable tightners...to take up slack and make banner tight.
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
Creative Banner (800-528-8846) has something that may work for you. It isn't exactly a frame but it will mount a banner against a wall. Its called Banner-Trak and consists of an upper and lower rail that mounts to the wall. Provided "sliders" attach the banner to the track thru the grommets. Their kit is $29.95 and includes two 4' traks, a connector and 4 sliders. Extra sliders, sections, and other accesories are available. Looks slick.