posted
I usually use the heavy duty plastic zip thingies for small signs on chainlink fence material but now I have a customer who wants something more, what is the best method or hardware for that? Thanks!
------------------ Brian Stoddard Expressions Signs 2621 244th Ave NE Sammamish WA 98074
posted
Brian, we use 1/4"x3/4" stove bolts (when using Dibond)and 2" body washers on the backside behind the chainlink. That's about as tough as it gets.
------------------ St.Marie Graphics & Makin' Tracks Sound Studio Kalispell, Montana stmariegraphics@centurytel.net http://www.stmariegraphics.com 800 735-8026 We're chiseling every day of the week! :^)
posted
We've used hog rings in the past. They sell these for use in installing chain link fence or for putting in hog's noses. Roughly c shaped and clinched with a specialized pair of pliers. These are for thin aluminum or sintra signs. For heavier signs usually put a piece of aluminum angle and bolt or screw through.
------------------ Dennis Goddard Excalibur Signs & Graphics Tampa Fl
Posts: 1050 | From: Tampa Fl USA | Registered: Apr 2000
| IP: Logged |
Printer-friendly view of this topic