posted
Rob, Try Advantage Sign Supply they may have what you are looking for. I'm sorry but I dont have number handy. Try 1-800-555-1212 of rthe number. Tell them you heard about it here on the BB. Try to get them to contact Steve to advertise here. Fred
------------------ Fred Floyd Carolina Vinyl Wilmington, NC USA
My first chomputer was a 4b and they were great!. Having said that...other than for pouncing, I think you should spend your money on a link card and run it off of your P.C. with all the true type fonts available at no cost. Ten years ago they wanted $250.00 per font.....aahhhh Murry Hill Bold
Good Luck in your quest.
Mark
------------------ Mark Fuller Fuller Signs Keswick, Ontario CANADA
posted
Running my 4b off the pc via Graphic Advantage6.2 Through Advantage Sign Supply on a Lease to own program ..... (machine pays for itself) Good stable product,same as the supplier. Grand Rapids MI Indianapolis IN Atlanta GA Richmond VA Tampa FL Should be one close to you!
------------------ PKing is Pat King of King Sign Design in McCalla,Alabama The Professor of SIGNOLOGY
Posts: 3113 | From: Pompano Beach, FL. USA | Registered: Nov 1998
| IP: Logged |
posted
Since I just managed to get my old 4B cutting after the Edge, I don't need the fonts. I have 15-18 of them, an outline module (not distortion though), a symbol and graphics font. I will list what they are in an e-mail to you tomorrow. I'm thinking 25 bucks each for the fonts. Firm
------------------ Myra A. Grozinger Signs Limited Winston-Salem, NC V 336-722-1033/F 336-723-6112 signslimited@triad.rr.com
Posts: 1244 | From: Winston-Salem, NC USA | Registered: Nov 1998
| IP: Logged |
posted
I have a few gerber 4b fonts I wouldn't mind parting with. The graphix advantage 6.2 does pay for itself just like Pat said.. (I'm still keeping my Gerber around for emergencies, like computer failure.) I can't say enough about the gerber 4b.
------------------ Deb**Creative Signs (and more)
Posts: 5373 | From: Loves Park, Illinois | Registered: Aug 1999
| IP: Logged |
posted
Thanks everyone for the advice. Understand the 4B is just a back-up system. I stole it from a guy for $100. I just would like a couple more fonts and maybe an outline/dist. My other system is Flexi with a 24" camm1(roland). I also do a fair share of race car lettering. The 4B and my generator may make it to the track from time to time. I figure one day at the track will cover the $100 investment.
------------------ "Paint with Passion"
Rob Larkham The Bershire Brush RL Graphic D-Sign Chester, MA rldsigns@aol.com 413-354-0287
Posts: 517 | From: Chester, MA | Registered: May 2001
| IP: Logged |
Printer-friendly view of this topic