posted
First off let me say I have already spent hours on the phone with Gerber tech.My problem is when i go to cut an edge print. A print with panels will cut off to much so the regidtration is not correct. The overlap feature is sit to 1/8 inch. This is with the latest version of Omega and a GS15 plotter. Any ideas??????/ Thanks
------------------ Kevin L. Kleinhans Alma Signs (Signs Be Me) Alma, Michigan 517 463-6851
Posts: 139 | From: Alma, MI USA | Registered: Dec 1999
| IP: Logged |
Printer-friendly view of this topic