I had a customer contact me about re-doing one side of the 93 pace car. I have searched high and low for a restoration kit for this car and can't seem to come up with anything. Do you have a good source or direction for us to look in. A few places referred a few other places, but still nothing. I only need one side of the car (driver) but will take what I can get. I can't match the colors using Avery or Neschen so I can't cut it. The stripes are metalic.
posted
As odd as it sounds I think I would contact the Indy Mueseum In Indianapolis Indiana (at the track) they have a great volunteer group that will research nearly anything that has to do with Indy.
Worth a try anyway...If nothing else maybe you can find out who provided the original pace car that year. Once you know that you should be able to track down the graphic supplier.All of that stuff is copy righted, so anyone that copied the original(from Indy) had to have their permission.What I'm trying to say here is there is a distinct trail here ...once you cross it you should be able to track it in either direction.
------------------ Monte Jumper SIGNLanguage/Norman.Okla.
[This message has been edited by Monte Jumper (edited September 02, 2001).]
posted
Thanks Monte and Victor, I will pursue both avenues you offer. Glenn, yes, I could vectorize it from a digital photo, then test plot it on paper to allow for tweaking. This is an option that I'm considering. (as a last resort) .
Thanks again!!!
------------------ Brian & Kathleen Keence K&B Signs 2220 Lake Tekawitha Rd Pacific, MO. 63069 (636) 257-5588 brian@kbsigns.com kathleen@kbsigns.com ******************** It's clear as mud now!