posted
If anyone can help me with a scan or good source for old motorcycle manufacturer logo's I would appreciate it. Particulalrly British and European such as Matchless, Norton, AJS, Villiers etc. Thanks, David
------------------ David Fisher D.A. & P.M. Fisher Services Brisbane Australia da_pmf@yahoo.com
Posts: 1450 | From: Brisbane Queensland Australia | Registered: Nov 1998
| IP: Logged |
posted
david just sent one for Norton I scanned some years ago on my old system hope it helps not real good
------------------ Ian Wilson Signmaker Toowoomba City Council Cnr Anzac Ave & Stephen st Toowoomba Queensland Australia may all your toubles be little ones The man that never make a mistake never makes anything
Posts: 656 | From: Toowoomba Queensland Australia | Registered: Nov 1998
| IP: Logged |
posted
Try the library. I ran across a book one time, I beleieve the name was "The Big Book of Motorcycles", it was filled with all kinds if old bikes from just about everywhere, lots of Vincents, Arials, Royal Enfields, etc. If I'm not mistaken they had logos heading up the different sections.
------------------ George Perkins Millington,TN. goatwell@ionictech.com
"I started out with nothing and still have most of it left"
------------------ Bill & Barbara Biggs Art's Sign Service, Inc. Clute, Texas, USA Home of The Great Texas Mosquito Festival Proud Third year Supporter of the Letterheads Website MailTo:twobeesusa@netscape.net
[This message has been edited by Bill Biggs (edited July 06, 2001).]
Posts: 1020 | From: Lake Jackson,Tx | Registered: Nov 1998
| IP: Logged |
posted
Thanks Gents, I did do a search, got a lot of sites and not too much in the way of useable artwork but at least its something to use for a guide to redrawing the logo. I had a longshot hope that someone might have vector files of one or some. Thanks again, David
------------------ David Fisher D.A. & P.M. Fisher Services Brisbane Australia da_pmf@yahoo.com
Posts: 1450 | From: Brisbane Queensland Australia | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic