posted
To date we've had somewhere in excess of 22 emails asking about an instructional video on how the average sign shop, never before involved in working with HDU, can acomplish professionally finished "carved" type signage. I have no problem doing this if there's truly enough interest. We guess that a comprehensive 45 minute to one hour video covering all of the basics from start to finish on a reasonble project would work. The cool part of doing this kind of signage is that you don't have to have an area like you would with sandblasting. A sign shop involved in paint only or vinyl only can easily set up and do this. The income difference is tremendous, and the optical differences between carved and sandblasted are dramatic. We have NO idea of cost factor. This is new territory for us, but we're "doers", not salespeople. I've seen prices on "How-To" videos out there, and I don't understand how many of them can be so expensive. You should be able to cover cost plus your time and ability. I strongly feel I'm worth a few hundred grand.......but my wife doesn't, so........I bow to superior judgement. Those who have already emailed, please don't post an answer. It'll give us a better idea of how feasible this is. Thanks, guys..............
------------------ St.Marie Graphics & Makin' Tracks Sound Studio Kalispell, Montana stmariegraphics@centurytel.net http://www.stmariegraphics.com We're chiseling every day of the week! :^)
Printer-friendly view of this topic