posted
I kind of wondering if anybody ou there can help me out to price a traila , Thhe area to work is 24" high by 34'ft long. The letters are 17" high with a cast shadow so it turns about 21" high. I will use high performance vinyl and it will be to sides and color pluse a elipce . The dimention are 56"high by 8'ft long. I really appreciate any help . Thanks, and god bless all of you!
------------------ It's important to be Important, But it is more important to FEEL Important...
Posts: 692 | From: New Freedom , PA US | Registered: Nov 1999
| IP: Logged |
posted
Up here in the BIG SKY, it's copy cost plus $45 per hour install. Any rivets.........corrugation?
------------------ St.Marie Graphics & Makin' Tracks Sound Studio Kalispell, Montana stmariegraphics@centurytel.net http://www.stmariegraphics.com 800 735-8026 We're chiseling every day of the week! :^)
posted
Well, unusual job. I'll ask Signwriters Publishing Company to add it to their pricing guide. (www.signwritersusa.com). But for now, use their vinyl letters price, at $15.90 per letter, and double for the cast shadow if its a different cut/weed job. As for the elipse, Signwrites states about $100 for 1000 square inches, so the 5600 or so sqinches of the elipse would be about $500 by the guide. Try that pricing for one side, and double it for the next side. Be sure to charge your shop hourly rate for installation.
------------------ Order Signwriter's Pricing Guides and Electronic Books at: www.signwritersusa.com
Posts: 20 | From: Billings, MT USA | Registered: May 2000
| IP: Logged |
posted
find out the price of the new trailer, do the lettering on it for 10% of that ......hehehehehe this is how you figure boat lettering....if the trailer cost $20,000 you get $2000.....
------------------ joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-944-5060 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND
Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
10%! Man, I wish I knew that rule when I painted that $103,000 Peterbuilt!
------------------ Steve Barba is the proud owner, president, & sole employee of Sturgis Sign Works. "B0LT" on the chat room thing. 209 Oak Drive Sturgis SD 57785 sbarba2616@dtgnet.com 605-720-7667
Posts: 768 | From: Sturgis South Dakota | Registered: Nov 1998
| IP: Logged |
posted
just shows..cost is relative to cost of object....boat letteringis an easy example, 16-20 ft boats...i letter transome,basic lettering, $60-80, 22-28ft, $125-175, 30-40 ft $200-400...over 50 ft...havent did any yet..but wouldnt touch one for less then $500 to start....if i do it on the sides, just double it...
------------------ joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-944-5060 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND
Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic