posted
I Have a sign lab file, larger than my plotter, that i need to cut. A friend has a 24" plotter but has corel draw to cut from. What format do I need to export my sign lab file so I can open it in Corel & cut it? Also, are there any little quirps that i need to know about corel? Any help in this matter would br appreciated.
Thanks
------------------ John Harville J & K Screen Printing Co. 115 Cottonwood Lane Danville, Va 24540 804-797-9014
Still working on a slogan.
Posts: 99 | From: Danville, VA USA | Registered: Jul 1999
| IP: Logged |
You're gonna have to export it as an AI file. It's the only way that I found (throught this board - by-the-way) for it to work correctly.
Good Luck!!
------------------ Pat Neve, Jr. Sign Man, Inc. 4580 N. US 1 Melbourne, FL 32935 321-259-1703 signman@signmaninc.com Capt. Sign Letterville Constituent constituent: "One of the individual entities contributing to a whole"
Posts: 2284 | From: Melbourne, FL, USA | Registered: Jan 1999
| IP: Logged |
posted
John...It shouldn't be a problem, using either EPS or AI. BUT remember to "convert text to curves" or "convert text to outines" or whatever it is called in SignLab. That way if the other guy doesn't have one of the fonts installed on his computer he can still cut.
------------------ Dave Grundy AKA "applicator" on mIRC "stickin' sticky stuff to valuable vessels and vehicles!" in Granton, Ontario, Canada 1-519-225-2634 dave.grundy@quadro.net www.quadro.net/~shirley
Printer-friendly view of this topic