I am in the middle of pricing out a 4 x 8 erasable marker board. To describe the workmanship of this board, would be as follows: The board will have a pile of lines on it running up and down creating a three part chart. In the first column of each of the three charts will have a color backgrounds. Part numbers will fill the chart. with spaces to follow, so they can use a marker to write in the order of the day. It is a very time consuming job that has me stumped to know what to charge. Would love to hear from those here in the Kitchener,Ontario/ London,Ontario/ Area
------------------ Stephen Bender Ideal Signing & Graphics Wroxeter, ON, N0G 2X0 scbender@sympatico.ca
posted
Steve...I have no idea about the cost of the actual board material but the rest of the stuff sounds like about $350. I would probably use pinstriping tape to do all the lines. Maybe use reverse panel for the coloured parts, letting the colour of the board show as the lettering?
------------------ Dave Grundy AKA "applicator" on mIRC "stickin' sticky stuff to valuable vessels and vehicles!" in Granton, Ontario, Canada 1-519-225-2634 dave.grundy@quadro.net www.quadro.net/~shirley
posted
Really That little. Ok the Board cost me about 35.00 and they want black letters. then pricing this job at $400.00 for a 4 X 8 board sounds real to you?
------------------ Stephen Bender Ideal Signing & Graphics Wroxeter, ON, N0G 2X0 scbender@sympatico.ca
posted
I've sold these anywhere from $400.00 to $600.00, depending on the complexity (I've made them where they've included plastic sheet holders, steel panels for magnets, etc.) Time and material is the only way to figure these. I use white enamel board (a particle board with a white enamel finish) and trim them out with the white plastic "J" channel the lumberyard sells for it. I lay out the grid pattern in the computer, then weld the lines. I then cut the grid out of 30" cast vinyl and panel it, if necessary. Sounds like with the colored areas and part numbers, I'd want around $450.00.
------------------ Tim Whitcher Quality Signs & Design 107 E Adrian St Blissfield, MI 49228 qualitysigns@cass.net
Posts: 1546 | From: Adrian, MI | Registered: Mar 1999
| IP: Logged |
Printer-friendly view of this topic