posted
I've just completed a 3X8ft sandblasted HDU sign. I've used 1Shot on the letters and acrylic on the blasted background. What's the recommended top clear coat to use, if any, and how would you suggest applying it? I'd like to add a little gloss or sheen to the background also. Any help appreciated.
------------------ B T Shepard Shepard Signs (910)347-2711
"don't know anything--heck!--don't even suspect anything"
Posts: 2 | From: Jacksonville, North Carolina | Registered: Jan 2001
| IP: Logged |
posted
Waterborne UV Clear under Chromatic label or solvent Clear UV under 1Shot label. With the mixed media I would use waterborne and it comes in gloss or flat and mixed half and half you get eggshell. Seals up the vinyl nicely too without lifting. Both products from 1Shot and their distributors.
------------------ Kent Smith Smith Sign Studio Greeley, Colorado, USA kent@smithsignstudio.com
Posts: 1025 | From: Estes Park, CO | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic