posted
This is probably a question for Piere. I tried looking through past messages, but I figured it would be easier to just ask.
I was wondering how Pelucid worked with transfer tape? I saw a few posts regarding using it for digital prints (I use a PC-60), however, it seemed Pelucid was applied after applying the vinyl to the substrate.
Can you use Pelucid after weeding a vinyl print, then apply transfer tape and give it to the customer (assuming, say, a customer application on a vehicle)?
If it's been answered already, I apologize. If not, can anyone (Pierre) give me some guidance with that?
Thanks, Randy Graphic Details
------------------
Posts: 381 | From: South Glens Falls, NY USA | Registered: Mar 2001
| IP: Logged |
posted
Not a problem. For some time now my daughter has been airbrushing vinyl film copy, allowing it to cure, spraying it with Pelucid, waiting 7 or eight minutes and then carefully weeding. The copy put on windshields with wipers that go way up, is now fully protected as the Pelucid won't scratch with the wipers. It accepts premask perfectly.
------------------ St.Marie Graphics & Makin' Tracks Sound Studio Kalispell, Montana stmariegraphics@centurytel.net http://www.stmariegraphics.com 800 735-8026 We're chiseling every day of the week! :^)
Printer-friendly view of this topic