posted
Being colorblind has not been a problem as long as the customer agrees with what they view is what they order. The problem is when ordering vinyl and it arrives a different color than the monitor graphic. A recent article advises setting Corel color palette to PANTONE.
I want to be able to order the product with only one standard process, either RGB, CMYK or PANTONE, what do you folks advise?
------------------ Ken Morse Jamn Graphics Santa Cruz, CA
Posts: 213 | From: Santa Cruz, CA. USA | Registered: Nov 2000
| IP: Logged |
posted
Ken...I have Avery and 3M color palletes that I made up for use in Corel. To my eye the colors on the monitor look pretty close to the actual vinyl colors. But there is no guarantee that they will apper that way on your montitor (cause they don't look the same on my laptop.)
If you want the palletes just ask and I'll e-mail them to you. themn you can load them into your custom color pallete folder in Corel and try them out.
------------------ Dave Grundy AKA "applicator" on mIRC "stickin' sticky stuff to valuable vessels and vehicles!" in Granton, Ontario, Canada 1-519-225-2634 dave.grundy@quadro.net www.quadro.net/~shirley
posted
Dave, I have not replied hoping to receive replys from other folks with the same dilema. I will research my problem further and keep you posted. Stay tuned, thanks again for your kind offer, but for now I will ponder it.
------------------ Ken Morse Jamn Graphics Santa Cruz, CA
Posts: 213 | From: Santa Cruz, CA. USA | Registered: Nov 2000
| IP: Logged |
Printer-friendly view of this topic