posted
Any Camm 1 users that can give me some pointers on configuring mine??????? I'm sure what I'm trying to do is not too complicated. I've got 2 pre-paid vinyl jobs waiting too. So I have to get it FIXED. Thanks
posted
what model camm1 do you have I have two different models and have just replaced an old model and all three are different need more info
------------------ Ian Wilson Signmaker Toowoomba City Council Cnr Anzac Ave & Stephen st Toowoomba Queensland Australia may all your toubles be little ones The man that never make a mistake never makes anything
Posts: 656 | From: Toowoomba Queensland Australia | Registered: Nov 1998
| IP: Logged |
posted
Wayne....I e-mailed you some infromation. If that doesn't answer your questions, give me a call at 519-225-2634 and I'll walk you through whatever is else is wrong. You have been using the cutter for 7 or 8 months now, so whatever is not correct can't be that much of a problem.
By the way....DON'T change any of the settings on the panel at the front of the cutter. They were set correctly when you recieved the cutter!!!!!!!
------------------ Dave Grundy AKA "applicator" on mIRC "stickin' sticky stuff to valuable vessels and vehicles!" in Granton, Ontario, Canada 1-519-225-2634 dave.grundy@quadro.net www.quadro.net/~shirley
[This message has been edited by Dave Grundy (edited February 18, 2001).]
Printer-friendly view of this topic