posted December 01, 2003 10:23 AM
I am going to try and bond HDU to Sintra PVC board Ive never worked with west systems Epoxy before and I wanna make sure Im ordering the right products
105 epoxy resin 205 fast hardener 300 mini pump set
has anyone done this with these product any thoughts?
posted December 01, 2003 12:42 PM
The only suggestion that I would make would be to use a slower hardener. If you have a large area to glue up, the faster hardener sets up rather quickly. For small pieces it's not that critical.
Also, I would suggest that you get the larger cans and pump system. The total expense is more but you will use up the small cans quickly. I bought the smaller pump system and then had to reinvest in the larger one when I was using up the smaller cans so quickly.
Also, the 403 Filler is handy to give more bulk to the adhesive and to fill in any voids between the two substrates.
I've glued up Sentra to HDU using West System with no problems.
[ December 01, 2003, 12:44 PM: Message edited by: Raymond Chapman ]
-------------------- Chapman Sign Studio Temple, Texas chapmanstudio@sbcglobal.net Posts: 6306 | From: Temple, Texas, USA | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic