posted
I've got an old Gerber using one of the first Mac interfaces to come out (circa '89) and the pins from the computer side of it's cable are damaged/pulled out. I need to know the proper sequence to reinstall the pins, or how to replace the cable.
The problem is the wiring sequence used was not given to me by the original owner and the original manufacturer no longer has the cables.
any advice would be appreciated.
-------------------- Joe McGillicuddy Signgraphix 2354 Lambert Drive, Pasadena CA jmcgillicuddy1@earthlink.net Posts: 20 | From: Pasadena, California | Registered: Oct 2003
| IP: Logged |
Printer-friendly view of this topic