posted
I am closing a job that consist of 5' x 8' DS signfoam. I am not sure how I want to mountand install them. One installation that I have been told about is to take 2x of 1" signfoam and laminate them onto 1/2" alumalite.
I like the look of 2 wrought iron rods coming out of the sides into wooden or wrought iron posts but I don't know if I can do it with sandblasted signfoam-especially for a sign this big.
-------------------- Laura Butler Vision Graphics & Sign 4479 Welch Rd Attica, Mi 48412 Posts: 2855 | From: Attica, Mi, USA | Registered: Nov 2000
| IP: Logged |
posted
you will certainly want to use a laminate of some kind one that. I would go for DiBond and then laminate some square aluminum framing in the middle for installation.
-------------------- Brian Stoddard Northwest Signs
posted
I had planned on laminating with alumalite but couldn't figure out how to do the wrought iron rods coming out from the sides. Will look in the archives.
-------------------- Laura Butler Vision Graphics & Sign 4479 Welch Rd Attica, Mi 48412 Posts: 2855 | From: Attica, Mi, USA | Registered: Nov 2000
| IP: Logged |
Printer-friendly view of this topic