posted
Hey, There is a guy/company that makes galvanized (I think) U-Brackets to hold 1/2" and 3/4" MDO. I can't find his info. Anybody have a number and/or website? Thanks in advance. Mark
-------------------- Mark Rogan The Great Barrington Sign Company 2 Stilwell Street, Great Barrington, MA 01230 mark@gbsignco.com
"Sometimes I think my head is so big because it is so full of fonts" Posts: 332 | From: Great Barrington, MA | Registered: Mar 2003
| IP: Logged |
posted
Before you go off and buy some from them, I may have some brackets for sell, rather cheap!! Several years ago I needed some brackets for a small sign I was working on, and ended up having to buy them in bulk, So I have a bunch laying around. I don't do installs anymore, so they are taking up space.
-------------------- Michael Clanton Clanton Graphics/ Blackberry 19 Studio 1933 Blackberry Conway AR 72034 501-505-6794 clantongraphics@yahoo.com Posts: 1737 | From: Conway Arkansas | Registered: Oct 2001
| IP: Logged |
posted
OK, I posted before I looked at the website Barry refered to. My "brackets" are the type you hang from a chain, U-shaped metal with a bolt thru the middle. So I guess they are not "brackets" at all but Sorry for the mix-up!
-------------------- Michael Clanton Clanton Graphics/ Blackberry 19 Studio 1933 Blackberry Conway AR 72034 501-505-6794 clantongraphics@yahoo.com Posts: 1737 | From: Conway Arkansas | Registered: Oct 2001
| IP: Logged |
posted
If you mean the U brackets that attach to the top of the MDO for hanging, N. Glantz has them. There's an N. Glantz in NJ and 2 in NY. They call them panel hangers and run a buck a piece for 1/2 inch or 3/4 inch MDO. I've put the 1/2 inchers in a vise and squeezed 'em down to make them work for Alumalite.
Printer-friendly view of this topic