posted
Anyone here have experience (good or bad) with one of these? I have an opportunity to buy a used one. The seller says it is about two years old but hasn't been used for the past year. Thought it might have 100 hours on it. Is there anything I should be watching out for? Will be running it from SignLab 5.
Thanks for your time to give me some advise.
-------------------- Chuck Churchill, It's A Good Sign Inc. 3245 Harvester Rd, U-12 Burlington, Ont. Phone: 905-681-8775 Fax: 905-681-8945 Posts: 633 | From: Burlington, Ontario, Canada | Registered: Nov 1998
| IP: Logged |
posted
I got the 24" CE1000-60 it is rock solid. Runs like a champ 4-5 years with no down time. I once set the pressure too high & advanced the blade out too depp for some thick stuff, & cut into the teflon strip. $12 later I was back in business, & learned my mistakes so I was able to cut that stuff in the end. One thing to know, is the 60 degree blades need a seperate blade holder assembly from the 45 degree one. Maybe you will get both. Ask for both in case he forgot after a year. (On mine, the 45 is red, the 60 is blue)
Printer-friendly view of this topic