posted
I have the Roland color camm 600. I was just curious how other people out ther are figuring out pricing for jobs. I guess what i am asking is how much per square foot.
Thanks in advance, JAKE
-------------------- Jake Lyman Lyman Signs 45 State Road Phillipston, MA 01331 Posts: 635 | From: Phillipston, MA | Registered: Sep 2002
| IP: Logged |
posted
Thanks for the reply's. I should look into that. Do I remember someone talking about an online demo for estimate?? I i am correct where can i find that?
Thanks Again, JAKE
-------------------- Jake Lyman Lyman Signs 45 State Road Phillipston, MA 01331 Posts: 635 | From: Phillipston, MA | Registered: Sep 2002
| IP: Logged |
The new wide format printing module was a lot of fun to debut and demonstrate at the last show (Orlando) - it has not only the substrates, the machines, the inks -but also pricing for lamination of the prints on anything you desire.
Download a fully functioning copy, play with it, and call with questions. Enjoy!
-------------------- Myra A. Grozinger Signs Limited Winston-Salem, NC
signslimited@triad.rr.com Posts: 1244 | From: Winston-Salem, NC USA | Registered: Nov 1998
| IP: Logged |
posted
Whatever the traffic will bear! I get $37.50 sq.ft. for 4-color process......min. 3 sq.ft.......$35 setup (PC60). A lot has to do with general pricing in your area.
posted
Unfortunately pricing in my area seems to be low. I have been trying to figure at least $22.50 or something like that. Sometimes I feel like i make money and sometimes i feel like i dont. I guess i should bump it up to the $30 range than see what happens. Thanks I appreciate the info.
JAKE
-------------------- Jake Lyman Lyman Signs 45 State Road Phillipston, MA 01331 Posts: 635 | From: Phillipston, MA | Registered: Sep 2002
| IP: Logged |
posted
$10 per linear foot? Guess it depends on whats being used. We use Duracoat 100yd foils. Figure $1.60/per foot for 4-color process foils. Use 3mil 3M white vinyl for another $.25 per foot and your into in for $1.85 per linear foot. So at $10 he's still pulling a 500% markup using cheap material. Really depends upon what the job is for. We shoot for $15 per sq. ft. with our edge 2.
-------------------- Bruce Evans Crown Graphics Chino, CA graphics@westcoach.net Posts: 913 | From: Chino, CA | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic