Try it like this. www.home.cogeco/~jchambers2/ Be sure to leave a space before & after the address without adding any punctuation which is not in url. It should automatically become a link when posted. You don't need the http:// part. I didn't test the link 1st so we'll see if this works. It should.
(edited in) Wayne types faster than me. That's how its done but the link I tried didn't work. Check that address again & type as recommended. Good luck.
[ July 21, 2003, 11:43 AM: Message edited by: Bill Cosharek ]
-------------------- Bill Cosharek Bill Cosharek Signs N.Huntingdon,Pa
bcosharek@juno.com Posts: 703 | From: N.Huntingdon, Pa, USA | Registered: Dec 1999
| IP: Logged |
posted
shouldn't there be a .com or something in there? If you can get to the site again Randy, are you just highlighting the address as it appears in your browser when you are at the site & then copying that address to your clipboard? That is the easiest way to get it correct when it is a complicated address with strange spellings & slashes etc. I see you just edited your link but I still am not arriving at the site.
Printer-friendly view of this topic