Just thought I'd let you in a situation that developed while clear coating Avery. I was matching color schemes for a design and made a decision. One was Avery A9 and one was Avery A8. Well after clearcoating an expensive sign with one shot UV clear, I noticed the edges on just the A9 was all curling........well isn't that special! So after trying to figure out what the heck happened, I discovered that the A9 is re-positionable. In other words the adhesive on the A9 won't setup for about two weeks and I didn't catch that spec. when ordering. So, for any of those that are picking colors for a design, make real sure it's not a re-positionable adhesive or if it is, make sure you wait a couple weeks before clearing over it.
Hope this saves someone some stress as this pretty much reuined my week!
-------------------- Chuck Gallagher Pro Graphics Signs by Design Cabool, MO 417.962.3291 "I grew up in Letterville" Posts: 776 | From: Cabool, Mo. USA | Registered: Nov 1998
| IP: Logged |
![[Roll Eyes]](rolleyes.gif)
Printer-friendly view of this topic