posted
The thinnest we've used is 10 mil flexible Lexan from Sun supply in Spokane Wa. We use it for a carrier on our old 750 plotter.
k31
-------------------- Pierre St.Marie Stmariegraphics Kalispell,Mt www.stmariegraphics.com ------------------ Plan on knowing everything before I die and time's running out! Posts: 4223 | From: Kalispell,Mt 59903 | Registered: Mar 2000
| IP: Logged |
posted
I think Gerber must be testing a 5 mil lexan because it's showing up in the materials list of Omega 2.0. As far as I know it's not available yet.
posted
-Laura i think what i´m looking for is the Lexan that Diane is talking about in previous post.
I was in contact with Gerber earlier and they confirmed that they were testing a thinner (5 mil) lexan, but they couldn´t tell when it would be released. They also said that it´s a lot of people asking about thinner lexan.
-------------------- Anders Elofson Dala-Järna Reklamtryck Noret 37 S-780 51 DALA-JÄRNA, Sweden Fax 0046 281 59 59 01 info@djreklam.com Posts: 3 | From: Sweden | Registered: May 2003
| IP: Logged |
![[Wink]](wink.gif)
Printer-friendly view of this topic