Thanks for all of the input to "The new Guy" post I left a while back first of all. You were all VERY helpful. What I need now is a suggestion on which digital printing setup that would be affordable and economical for a newbie. The "Edge" would be my first choice if I had lots of money to spend right off... but I don't. Is printing on banner stock a tough and expensive venture is another question also. Thanks in advance to those who send me their two cents worth.
Rick
-------------------- Rick Haywood High Country Signs Waynesville, NC Posts: 12 | From: Waynesville, NC | Registered: Mar 2003
| IP: Logged |
It really depends on what kind of market you are going after.
For myself, the Edge is the way to go. I do a lot of short-run decals and very little wide-format printing. I get a lot of calls for the first and very, very few calls for the other.
I would recommend going to www.gspinc.com and check out some of the financing programs that Gerber has to offer. We got our first Edge through their leasing program.