I am in need of someone to produce digital prints for intermittant use on the outside of a building. These prints would be outside for a month or so at a time, possibly 3-4 months over the period of a year. I will need them possibly as big as 3'x5' and as small as 8 1/2"x 11" or so and anything in-between. The smaller ones would be used inside and outside. Some may need to be laminated or applied to coro. Not sure which way to go with this and if you can do them or if you have ideas please let me know. I will need prices per sq. ft., etc.
These are to be used for a restaurant chain and will be monthly specials. etc. I need some ideas on how we would go about attaching a frame (or something) to a brick wall so that we might change them out once in a while. The smaller ones might be used as displays for table tops, danglers, menu, drive-thru menu, etc. We have high res pics and layouts ready for printing just looking for ideas.
Thanx in advance, R.T.
P.S. I would like to keep this at "home" here in Letterville if possible.
[ April 02, 2003, 09:26 PM: Message edited by: R T Thomas ]
-------------------- R.T.Thomas,AirDesigns/Sign And Airbrush Studio rtart1@earthlink.net
Hattiesburg,MS 39401 Shop 601-584-1000 Cell 601-310-5901 Proud supporter of LETTERVILLE!
"Ahhhhhh.......Juicy Fruit." Posts: 547 | From: Hattiesburg,MS USA | Registered: Nov 1998
| IP: Logged |
posted
Hiya RT, I can do the printing for ya with indoor or outdoor media and inks - using the correct media for the application, supply you with the frames and anything else that may acompany a job like this. Plus, I can also set you up with a way to distribute them to your clients on a as needed basis using web based fulfillment. If you're interested, fire off an email to me @ work or give me a buzz.
Havin' fun,
Checkers
-------------------- a.k.a. Brian Born www.CheckersCustom.com Harrisburg, Pa Work Smart, Play Hard Posts: 3775 | From: Harrisburg, Pa. U.S.A. | Registered: Nov 1998
| IP: Logged |
posted
shoot me an email. I can get it done for you on indoor and outdoor mts. 3 year unlaminated life. I have 1000% prolongation laminate available too. You would be looking at some wherebetween $1.85 to 2.45 per sq. foot depending on the substrate. This time of year we are running three shifts so our average turn around time is 48 hours. jeffgarston@hotmail.com
-------------------- Jeff Garst Garst Signs Ct Posts: 19 | From: CT | Registered: Mar 2003
| IP: Logged |
![[Smile]](smile.gif)
Printer-friendly view of this topic