posted
I am looking for a source on Clear acrylic J-Channel, and H-Channel to accept an 1/8" thick substarte. These will be used as a slide in type track. I've searched high and low? Any help would be appreciated!
Thanks, Brian Caissie
-------------------- BRIAN CAISSIE
7 Dewey St. Unit 11 Natick, Ma 01760 Posts: 99 | From: Natick, Ma | Registered: Jan 2002
| IP: Logged |
-------------------- Leaper of Tall buildings.. If you find my posts divisive or otherwise snarky please ignore them. If you do not know how then PM me about it and I will demonstrate. Posts: 5278 | From: Im a nowhere man | Registered: Jul 2001
| IP: Logged |
posted
Brian: Try Home Depot or any building supply store. I've been using Lattice caps. Works great!
[ December 28, 2002, 04:42 PM: Message edited by: J & N Signs ]
-------------------- Mario G. Lafreniere (Fergie) J&N Signs Winter did show up! Posts: 1257 | From: Chapleau, Ontario | Registered: Jun 1999
| IP: Logged |
posted
They're not the fastest, but I'll bet that they have what you need. http://www.outwater.com/ Just make sure that you don't operate on a tight deadline when dealing with them. I will add that they are great with sending samples and, depending on the rep, they can be quite knowledgeable. Havin' fun, Checkers
-------------------- a.k.a. Brian Born www.CheckersCustom.com Harrisburg, Pa Work Smart, Play Hard Posts: 3775 | From: Harrisburg, Pa. U.S.A. | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic