posted
Well things have slowed down and it's that time of year to do some winter cleaning.
My material corner is under my skin, I must build a rack now I can't take it anymore. I had a print out from a post long ago about this, but it has dissapeared just in the last few days, when I need it most ( go figure huh? )
Anyway, what I am looking for is maybe some different ideas about material racks than I am thinking of, so as to incorporate some better ideas.
If you care to share pics of your rack I'd be very greatful and appreciative.
Thanks in advance.
Bob
[ December 09, 2002, 10:42 PM: Message edited by: Bob Rochon ]
-------------------- Bob Rochon Creative Signworks Millbury, MA 508-865-7330
"Life is Like an Echo, what you put out, comes back to you." Posts: 5149 | From: Millbury, Mass. U.S. | Registered: Nov 1998
| IP: Logged |
posted
Material rack as in vinyl material or other stuff like sheets of pvc or MDO?
I made some vinyl roll holders/display racks by cutting 3 foot lengths of 2x2 treated lumber and then drilling holes (in a slightly upward angle) in the 2x2's for 1/2" electrical conduit to slide the vinyl onto.
On the back of these I placed 2 keyhole clips and put screws in the wall spaced apart to match the keyhole clips.
Each stick like this held about 6 rolls of material and was very inexpensive to make.
-------------------- EmpY Mayo Pardo #138 South Elgin, IL. Posts: 436 | From: South Elgin, IL | Registered: Nov 1998
| IP: Logged |
I am building a movable Substrate rack for my garage. It will be upright and on wheels for quick moving. I think most shops could benefit from anything whith wheels lol.
-------------------- Bob Rochon Creative Signworks Millbury, MA 508-865-7330
"Life is Like an Echo, what you put out, comes back to you." Posts: 5149 | From: Millbury, Mass. U.S. | Registered: Nov 1998
| IP: Logged |